CDY1-40 / 4P surge protector parameters:
Product model: CDY1-40 / 4P Rated working voltage Uc (Vac): 385V / 440V
Response time: 25ns continuous working voltage Uc (Vac): 385V
电流In (8/20μs):40KA Voltage protection level up: 2.5 zui large discharge current In (8 / 20μs): 40KA
-40℃ ～ +85℃ 标称放电电流Imax(8/20μs) ：20KA Temperature: -40 ℃ ～ + 85 ℃ Nominal discharge current Imax (8 / 20μs): 20KA
CDY1-40 / 4P Surge Protector Product Features:
CDY1-40 / 4P second-level protector is a protection device for the residual voltage of the front-end protector and the induced lightning strike in the zone. When the large-scale lightning energy absorption occurs in the front-end, there is still a part of the equipment or third-level protector In terms of energy, it is quite huge, it will be conducted and needs to be further absorbed by the second-level protector. At the same time, the transmission line passing through the * class lightning arrester will also induce electromagnetic pulse radiation from lightning strikes. When the line is long enough, the energy of the induced lightning becomes large enough, and a second-level protector is required to further discharge the energy of the lightning strike. In some places with heavy moisture, the installation position and equipment protection must be adjusted during the maintenance process to improve the equipment's moisture resistance. At the same time, dehumidification measures must be taken frequently in high-humidity areas to solve the problem of moisture resistance. All components of the protection circuit will be connected in series with the input. 。 Once the inrush current is absorbed by the thermistor, either the triac begins to ignite or the relay turns off . When connected in parallel, that is, when the arrester is connected between the active wire and ground, there is no need to pay attention to the rated current of the arrester, because the rated current does not pass through the arrester. In the case of a circuit equipped with a series surge protector, attention must be paid to its rated current. In a circuit with a high data transmission rate, the attenuation of the surge protector plays a decisive role.
CDY1-40 / 4P surge protector application industry:
CDY1-40 / 4P, CDY1-20 / 4P, CDY1-65 / 4P series surges are 8 / 20μS surges, and they are secondary system surge protectors. They are usually used in low-voltage power distribution and belong to power surges. protector. Usually used in construction, medical, environmental protection, industrial and mining, petroleum and other industries.
Shaanxi Dongsheng Electric Co., Ltd. produces and sells surge protectors, intelligent surge protectors, fire monitoring, intelligent lighting, fire power monitoring, fire door monitoring, intelligent control devices, status switch indicators, control and protection switches and other products. All products have a three-year warranty, sufficient inventory, and free distribution in Xi'an. One-stop product service from production to sales.
- ¥ 500
Shaanxi Dongsheng HLSP-400 / 20 secondary current 20KA surge
- ¥ 500
Shaanxi Dongsheng BY4-60 secondary current 60KA surge protector
- ¥ 500
Shaanxi Dongsheng TPS-B80 secondary current 80KA surge protector
- ¥ 500
Shaanxi Dongsheng MC50-B Level I Inrush Current 50KA Surge Protector
- ¥ 500
Shaanxi Dongsheng LQU1-B80 / 4P-420 secondary surge
Tips: In order to avoid purchasing risks, it is recommended that you always confirm the supplier's qualification and product quality before purchasing the product.